SALSCO 810PTO Wood Chipper Hydraulic Point

( Brand: Salsco ), ( Manufacturer Part Number: 810PTO ), ( Country/region Of Manufacture: United States ), ( Type: Wood Chipper Pto )

Review SALSCO Pto Wood Chipper Commercial Hydraulic Feed Point

The 810pto Wood Chipper 10-18 Hydraulic Point by Salsco is an impressive piece of equipment designed for efficient and effective wood waste management. This heavy-duty chipper boasts a powerful 10-18 HP PTO engine, ensuring reliable performance and high-volume throughput.

The 810pto Wood Chipper features a hydraulic point feed system, which provides smooth and controlled feeding of wood chips into the chipper. This system reduces the risk of jamming and ensures consistent chip size, making it easier to handle and use. The chipper's large hopper can accommodate a variety of wood types and sizes, making it ideal for both residential and commercial applications.

The 810pto Wood Chipper is constructed with heavy-duty steel and is designed to withstand the rigors of regular use. Its durable housing and reinforced components ensure long-lasting performance and minimal maintenance requirements. The chipper also comes with a reliable hydraulic system, which ensures consistent power and control.

The 810pto Wood Chipper 10-18 Hydraulic Point by Salsco is easy to operate and maintain. It comes with a simple and intuitive control panel, making it easy to adjust the chipper's settings and monitor its performance. Its easy-to-clean design and maintenance-friendly components also make it easy to keep the chipper in top condition.

In conclusion, the 810pto Wood Chipper 10-18 Hydraulic Point by Salsco is a powerful and reliable wood chipper that is ideal for any application that requires efficient wood waste management. Its hydraulic point feed system, heavy-duty construction, and easy-to-use design make it a standout choice for both homeowners and professionals alike.

1. Powerful Operation: The 810pto Wood Chipper is equipped with a powerful 13.5 HP engine, allowing it to handle a wide range of debris with ease.

2. Versatility: With a capacity of 10-18 inches, this wood chipper can handle branches up to 3.5 inches in diameter, making it suitable for both residential and commercial use.

3. Hydraulic Feed System: The hydraulic feed system makes it easy to feed wood into the chipper, reducing the risk of jams and increasing efficiency.

4. Durable Construction: The Salsco 810pto Wood Chipper is built with heavy-duty materials, ensuring long-lasting performance and reliability.

5. Easy Maintenance: The wood chipper features easy-to-access maintenance points, making it simple to keep the machine in top condition.

1. Price: The Salsco 810pto Wood Chipper is a higher-end model, and its price may be prohibitive for some buyers.

2. Size and Weight: At 1,150 pounds, the wood chipper is heavy and may require a large vehicle for transportation.

3. Noise Level: The wood chipper can be quite noisy, which may be a concern for those living in residential areas or close to neighbors.

4. Limited Warranty: The wood chipper comes with a limited warranty, which may not provide sufficient coverage for some buyers.

The Salsco 810pto Wood Chipper 10-18 Hydraulic Point is a powerful and versatile wood chipper that is well-suited for both residential and commercial use. Its durable construction, easy maintenance, and hydraulic feed system make it a reliable and efficient choice for those who need to handle large amounts of debris. However, its high price, size, weight, and limited warranty may be drawbacks for some buyers. Ultimately, the decision to purchase the Salsco 810pto Wood Chipper should be based on your specific needs, budget, and level of comfort with the machine's features.

If you have a large amount of debris to handle and are willing to invest in a high-quality wood chipper, the Salsco 810pto Wood Chipper 10-18 Hydraulic Point is a solid choice. However, if you are on a tight budget or have limited space for storage, you may want to consider a less expensive or smaller model that meets your needs. Researching other options and reading reviews can help you make an informed decision.

Details:

Pto shaft: heavy duty with safety cover. Chipper blades: four x 4/1 2 double steel, reversible, bolted and set into 2-knife pockets. This machine is not only durable, but simple to maintain.

It has all the heavy duty specifications as model 810, and only requires 35 hp at pto. Hydraulic feed: large 21 diameter x 18 long 600 lb. Bed knife: two 2 one horizontal 1 thick x 7 18 and vertical 9, both knives are reversible adjustable. Options: 1,176 speed sensing.

Speed sensing is available as an option well. Most states are free shipping.

Bearings: bolt flange bearing. Feed rate 0-125' per minute. 1,727 hydraulic lift cylinder. Options: hydraulic lift cylinder is an excellent option when chipping large branches.

Fenders: extra heavy duty 1/4 diamond plate fenders with safety light guards. Hydraulic hoses 2,500 lbs. This facilitates the feed roll having to climb over large branches. Psi working 10,000 lbs burst, including hydraulic pump control valve with relief valve, motor and gallon oil reservoir.

All parts painted separately. Specifications: indeed opening: 10 x 18 opening at the roll. Discharge: 360 degree swivel chute with adjustable chip deflector. Indeed chute: extra wide profile 1/4 thick steel plate sides 57 x 33, control bar positioned at top and side of tray to movement material forward, neutral reverse ,048 model 810PTO capacity minimum 35 hp required the pto.

Call about shipping Craig. Of the impeller and stops feed roll when r. Frame: 2 x 4 rectangle tubing with support gussets and continuous welds for strength. The backside of impeller showing extra wide chip blade pocket which increases exhaust thereby decreasing clogging.

Paint: orange, polyester powder coat paint provides excellent outdoor weather ability and offers protection against ultra violet discoloration. An invaluable tool. No tools required for adjustment 270 degree stop available if. This unit can be towed, over the road, from location.

Full set of safety decals. Dimensions: length : 11' width : 5' 5 height : 7' 7 - to top of discharge. The hydraulics are fully self contained so no oil is required from tractor. Tor flex axle features an independent suspension cushioned with rubber providing a smooth quiet ride no transfer of road shock from one wheel to the other.

Self centering heavy duty cast iron type. Bearings: 3, 4 bolt flange bearings. Has four 1/2 double sided, reversible chip blades set into knife pockets. The operator lifts feed wheel using lever mounted on indeed so that he can place branch under wheel, then lower onto and it will draw into chipper.

The 810PTO is pto version of our model 810 engine driven chipper. Guards decals: all moving parts guarded. The 810 x 18 hydraulic feed with friction clutch pto shaft. Hydraulic tank: x axle: 6.

Weighted feed roll with 14 rows of long replaceable knives and scraper bars to prevent wrapping. Only 35 hp minimum required. High speed, highway rib mounted on a 6 bolt white spoke wheel. Hydraulic feed system: heavy duty 1,200 lb.

Feed sensing is the only option offered with this machine. Quality of workmanship, innovative design, built to last. Mounted on a diameter steel hub with 6 exhaust blades approximately 600 lbs. Chipper disc: 2 thick x 32 diameter disc, machined and balanced.

Max load 2,540 lbs. The extra wide indeed opening designed to reduce pruning time and increase efficiency. Weighted box type feed system. Feed sensing monitors the r.

Tire wheel assemblies: two 2 st225. 75r15, 8ply, 28. The hydraulics on this unit are self contained and do not require any from tractor. Made in the USA. Speed sensing monitors the impeller rpm, and should rpm drop to a certain indeed will stop wait for of come up full operating then it start feeding in material.

This is a single feed wheel unit, with an extra large 18 wide opening. Hydraulic drive to feed roll is done through 80 chain and sprockets for increased torque longer motor life. The extra wide 18 indeed opening means less pruning and more efficient processing of material.

part #: 810pto prices

• $125.00-$228.50

specifications chippershredde:

• brand: Salsco
• mpn: 810pto
• country/region of manufacture: United States
• type: Wood Chipper Pto

Payments chippershredde:

• PayPal

Ratings:

1. Thanks! 05-15-17
2. Great 02-09-17
3. brings a shine back very nicely to floors 06-15-17
4. Pleasure doing business with you! 12-06-16
5. Smooth transaction. Quick delivery. As described. Thank you 09-01-16

General chippershredde:

• condition: New
• homegarden > yard gardenoutdoor living > outdoor power equipment home garden > chippers shreddersmulchers outdoor power equipment
• in stock: Yes

Seller chippershredde:

• zipcode: 17557
• city: New Holland, Pennsylvania

Returns chippershredde:

• policy: no returns

Shipping chippershredde:

• type: Freight

Offer chippershredde:

• quantity: 1
• Started: August 3, 2017, 12:33 pm
• best offer: false
• Sold: 0
• bids: 0

Salsco 810PTO Is Similar To:

• 413h Salsco Wood Chipper 4 (75% similar) Bearings: heavy duty, cast iron, grease able self centering. Specifications: indeed chute: x plastic strips for safety. Frame: 7 gauge steel frame, fully gusseted for strength. Capacity torsion axle. As it is compact and will easily fit through gates can be towed by a utility vehicle, golf cart or ...(April 4th, 2017)
• 616csv Salsco Chipper Shredder Vacuum (47.8% similar) Jack: 1000 lb. Built tough for all the jobs. Flail assembly has 4-HARDENED steel shafts with 4, hardened blades on each shaft. Vacuum hose: clear PVC flex hose, 10 diameter x 10' long. Choose chips or shredding extended exhaust for loading into truck collection box, add a 50' hose putting shredded ...(April 7th, 2017)
• 6210 Salsco Pto 3-point Wood (62.1% similar) 9,429 hopper 10 x gravity feed with friction clutch pto shaft. Nine thick, double-sided, chip blades, segmented into 3 knife pockets. Exhaust chute: 360 degree swivel exhaust, 11 gauge steel, easy adjust flap, no tools necessary. Be BYPWMSIT7TI made in the USA. Dual feed rolls provide extra crushing...(August 1st, 2017)
• 6240s Salsco Wood Chipper Hydraulic (64.6% similar) Chipper disc: 1 thick x 29 diameter, 6-WELDED and gusseted exhaust paddles, fully balanced. Clutch belt: centrifugal clutch, triple band clogged v-belt. Tor-flex axle provides easy quiet towing over the road lbs. Indeed opening: 7 x 8 opening to the chipper disc. The tor-flex axle provides a smooth...(March 29th, 2017)
• 624pto Salsco Pto Wood Chipper (90% similar) Adjustable, bed knife. 540 pto rpm recommended. Most states are free shipping Craig. Replaceable, sharp enable, adjustable steel bed knife. 7 gauge steel, indeed chute, continuous welds for extra strength. 3-POINT hitch pins are provided. This unit utilizes, 1/2 thick x long 4 wide, double edge, ...(May 30th, 2017)
• 624xt Salsco Pto Wood Chipper (84.7% similar) Large 4 x 5 indeed opening, means less pruning and trimming clear debris curtain strips help protect the user from fly back of material. 1/2 double sided chip blades, large 4 x 5 indeed opening, 3 thick impeller and 360 degree exhaust chute are just some of the features that put this machine way ...(June 28th, 2017)
• 625ns Salsco Chipper Shredder Vacuum (45.5% similar) Great for the landscaper. All vacuumed material goes through the shredder assembly reducing it even further. Flail cage: 32 blades on four hardened steel shafts. Indeed tray: 46 to pinch point with fold up safety tray down. 16,030 640S discharge: 360 degree exhaust chute with adjustable flap. Model'...(April 11th, 2017)
• 627pto Salsco Pto Wood Chipper (90% similar) The model 627 is a 6 capacity chipper with large 7 x 8 indeed opening. 540PTO rpm recommended. YouTube video: s: youth degree exhaust. Only 25 hp required the pto. Adjustable, sharp-enable bed knife. No tools needed. 3-POINT hitch pins are provided. 360 degree exhaust chute, and easy adjust flap. ...(July 10th, 2017)
• 627xt Salsco Wood Chipper Pto (71.2% similar) Reverse neutral slow fast indeed rolls: quantity options: speed sensing is available as an option. Indeed opening: 7 x 8 opening to dual rolls. Flow control is standard, and easily adjusted to be compatible with most tractors in the field. No tools are necessary to adjust the exhaust chute. The ...(June 29th, 2017)
• 824pto Salsco Pto Wood Chipper (93.3% similar) The extra wide indeed hopper allows bushy branches to be pulled in and chipped from edge roll 28 ground tray. Chipper blades: two chip blades. The model 824 has four adjustable legs which can be raised for transport through Woodland lowered storage or operation. Standard features and specifications...(June 27th, 2017)
• 8416b Salsco Wood Chipper 4 (77.2% similar) Made in USA. 6 gallon capacity, with lockable filler cap dip stick. An invaluable tool. Hydraulic tank: 10 x 8 steel tank. Exhaust chute: 360-DEGREE swivel chute and flap is quickly easily adjusted to direct. The control handle has a slow speed, fast neutral and reverse to chip size feed is easily ...(March 30th, 2017)